Ego Spinner – Update 3

In the last Update about your Ego fidget spinner I said the material was nearly here.

Well – it’s here!

What I thought I would do is show you the raw material …before we start machining it. 🙂

Here is some thinner titanium at the back of the shelf that will be used for the buttons (yeah, I know, bad photo):



And here is the main material for the spinners themselves:




Now, if you’re observant…

You should notice that some of the bars have “55” written on them …and some have “50” written on them.

This makes it easier to identify the 55mm diameter bar and the 50mm diameter bar. Pretty simple system 😀

Also, yes, both bars are larger than the Ego spinner …but I wanted to leave room in case I made any further small developments or tweaks to the size/shape/design.

That’s really all I have for you today.


If you have any questions or comments then please let me know in the comments below.


  • Will says:

    What a treat to be a part of such a great project. I feel privileged to see how a product like this gets completed. Thanks for the update Magnus!

    P.S When I read that there could be “tweaks” I got excited 🙂

  • Tassin says:

    Hey! Look’s great! It’s nice to see the raw material before ?

  • Artur R. says:

    What is the value of one of these bars?

  • Oh snap! says:

    I am tripping to get this spinner, I should have ordered 2. I know it will be beyond dope. I wish I could go into hyper sleep until Nobember, na for real, I just really want the spinner.

  • Severin says:

    How is the status? You are allready in production with the EGGOOOO? 😉

  • Jason says:

    Check 1,2….check 1,2…, is this thing on? update please. Thank you sir.

  • JD says:

    It’s November !! Any Updates ??

  • WILLIAM says:

    Hi Magnus,

    What’s the delivery status of the Ego spinner? Tks

  • >